I wish I had my own Windows developer
I'd chain him to the fir tree and the back yard and go out and beat him with a stick whenever Windows really pissed me off. He'd be bruised from head to foot.
Make7
(8,543 posts)ManiacJoe
(10,136 posts)Or so I have been told!
steve2470
(37,457 posts)pscot
(21,024 posts)since 1995. Sometimes it does; sometimes it doesn't. It seems as though any minor alteration to the system configuration moves it into the "doesn't" category. I lack the patience for this sort of thing. I guess I could simply wire it up, but that's so inelegant.
steve2470
(37,457 posts)I'll help you if I can.
pscot
(21,024 posts)running (occasionally) under Windows 7. I had put in a new Medialink router and all was good until my wife somehow fried the router. I installed my old Linksys and haven't been able to print since. In the toing and froing I've obviously left some box unchecked or button unpushed, but I can't seem to find it. I know I'm going to have to disable the network and reinstall the router, but I'm resisting the idea. I think there's some kind of emotional block.
steve2470
(37,457 posts)Usually within a day or so, someone ambles along with a good answer. Microsoft monitors those forums, so you might get someone who knows something. Good luck !
pscot
(21,024 posts)lastlib
(23,213 posts)"[S]omeone who knows something" probably should not be preceded by a statement pertaining to Microsoft....
my 2cts....
ChromeFoundry
(3,270 posts)This model can connect to your network either via a Ethernet cable or by way of a Wireless WiFi connection.
If you are going Wireless and changed out your router, reconfigure the SSID and WiFi Key to connect to the new access point.
For both Wired and Wireless connections, configure your router to assign a DHCP IP reservation for the MAC address (they are different for Wired and Wireless) of the network connection of the printer to something within the range of your DHCP IP addresses pool.
WiFi Connection Example:
WF3540 Wireless MAC address: 5f:4e:25:34:FF:31
Routers IP address: 192.168.1.1
SSID: linksys
WiFi Key: <your secret passkey>
DHCP Starting IP: 192.168.1.100
DHCP Addresses: 100
Assign MAC Address 5f:4e:25:34:FF:31 to 192.168.1.150
Configure WF3540 to Connect to SSID "linksys" with passkey and use Automatic IP Address Configuration (DHCP).
From your computer, remove your old Printer, then, Add a New Network Printer... Have it scan your network and install automatically.
You have to do this when you swap out the router because the SSID, BSSIS and Access Point have all changed.
Wireless printers are great when nothing changes... I always stick to Wired connections for network appliances and servers - way less configuration headaches.
Hope this steers you in the right direction.
Thor_MN
(11,843 posts)Not very helpful to you, but I would view that as a bonus that you can get it to work sometimes.
pscot
(21,024 posts)for a Star 9-pin dot matrix
Thor_MN
(11,843 posts)hobbit709
(41,694 posts)Just did that for a friend who upgraded her office computer to a Win 7 one which had no parallel port for her old HP laserjet. Plugged it into adapter. Win 7 said new hardware found, installed and it's been printing just fine since.
jrandom421
(1,003 posts)you couldn't afford to hire one or even get one on contract.
steve2470
(37,457 posts)It looked like ChromeFoundry had the answers.